Revista de Odontologia da UNESP
https://revodontolunesp.com.br/article/doi/10.1590/1807-2577.20250052
Revista de Odontologia da UNESP
Artigo Original

Cleaning solutions and liner type: in vitro bond strength on three-dimensional printed denture bases: the effects of cleaning solutions on prosthesis bases

Soluções de limpeza e tipo de reembasador: resistência à tração in vitro de bases de próteses impressas em 3D: os efeitos das soluções de limpeza nas bases de próteses

Emel ARSLAN; Halil Nuri OZDEMIR; Hatice SEVMEZ

http://dx.doi.org/10.1590/1807-2577.20250052 Rev. odontol. UNESP, vol.55, e20250052, 2026
PDF
Downloads: 0
Views: 13

Abstract

Introduction: This study aimed to investigate the tensile bond strength of hard and soft reline materials bonded to three-dimensional (3D)-printed denture bases and to evaluate the impact of various cleaning solutions on these properties.

Material and method: Specimens of 3D-printed denture bases were relined with either hard- or soft-liner materials. The samples were then treated with five different cleaning agents: sodium hypochlorite, hydrogen peroxide, distilled water, acetic acid, and a commercial chemical denture cleaner. The tensile bond strength at the liner-base interface was measured using a universal tensile testing machine. Data was analyzed using two-way ANOVA (α=0.05).

Result: The hard-liner material exhibited significantly superior tensile bond strength compared to the soft-liner. Among the cleaning agents, the chemical denture cleaner exhibited the highest tensile bond strength (24.89 ± 2.68 MPa), while sodium hypochlorite exhibited the lowest value (17.20 ± 1.81 MPa).

Conclusion: For 3D-printed denture bases, hard liner materials provide greater tensile bond strength than soft liners. Furthermore, the choice of cleaning agent significantly influences bond integrity; specifically, sodium hypochlorite may adversely affect tensile strength. Selecting an appropriate cleaning protocol is essential to improve the longevity of relined 3D-printed prostheses.

Keywords

Cleaning solutions; denture liners; tensile bond strength

Resumo

Introdução: Este estudo teve como objetivo investigar a resistência à tração da união de materiais de reembasamento rígidos e resilientes (soft) aderidos a bases de próteses impressas em três dimensões (3D) e avaliar o impacto de várias soluções de limpeza sobre essas propriedades.

Material e método: Espécimes de bases de próteses impressas em 3D foram reembasados com materiais de reembasamento rígidos ou resilientes. As amostras foram então tratadas com cinco agentes de limpeza diferentes: hipoclorito de sódio, peróxido de hidrogênio, água destilada, ácido acético e um limpador químico de próteses comercial. A resistência à tração da união na interface reembasamento-base foi medida utilizando uma máquina de ensaio universal. Os dados foram analisados através de ANOVA de duas vias (α=0,05).

Resultado: O material de reembasamento rígido exibiu uma resistência à tração da união significativamente superior em comparação ao resiliente. Entre os agentes de limpeza, o limpador químico de próteses exibiu a maior resistência à tração (24,89 ± 2,68 MPa), enquanto o hipoclorito de sódio exibiu o valor mais baixo (17,20 ± 1,81 MPa).

Conclusão: Para bases de próteses impressas em 3D, materiais de reembasamento rígidos proporcionam maior resistência à tração da união do que os resilientes. Além disso, a escolha do agente de limpeza influencia significativamente a integridade da união; especificamente, o hipoclorito de sódio pode afetar adversamente a resistência à tração. A seleção de um protocolo de limpeza adequado é essencial para aumentar a longevidade de próteses impressas em 3D reembasadas.

Palavras-chave

Soluções de limpeza; reembasadores de próteses; resistência à tração da união

Referências

1 Seo RS, Vergani CE, Giampaolo ET, Pavarina AC, Machado AL. Effect of a post-polymerization treatments on the flexural strength and Vickers hardness of reline and acrylic denture base resins. J Appl Oral Sci. 2007;15(6):506-11. https://doi.org/10.1590/S1678-77572007000600010. PMid:19089189.

2 Palla ES, Karaoglani E, Naka O, Anastassiadou V. Soft denture liners’ effect on the masticatory function in patients wearing complete dentures: a systematic review. J Dent. 2015 Dec;43(12):1403-10. https://doi.org/10.1016/j.jdent.2015.09.005. PMid:26404406.

3 Hasegawa Y, Minakuchi H, Nishimura M, Nishio K, Yoshioka F, Ishii T, et al. Effect of soft denture liners on complete denture treatments: a systematic review. J Prosthodont Res. 2024 Oct;68(4):493-510. https://doi.org/10.2186/jpr.JPR_D_23_00067. PMid:38382972.

4 Atay A, Çal E. Farklı yumuşak ve sert astar materyallerinin protez kaidesiyle olan bağlantısının ve sertliklerinin incelenmesi. Ege Univ Dis Hekim Fak Derg. 2018;39:88-97.

5 Rotter NM, Sabatini GP, Kahveci Ç, Yoon HI, Fonseca M, Jamjoom FZ, et al. Influence of nonhazardous postprocessing solutions and surface treatments on the surface roughness and color stability of resins used for additively manufactured definitive restorations. J Prosthet Dent. 2025 Jul;134(1):167-75. https://doi.org/10.1016/j.prosdent.2025.02.016. PMid:40122749.

6 Nam OH, Chung SY, Hyun HK, Ye JR, Jeong Y, Oh SE, et al. Influence of postprinting cleaning methods on the cleaning efficiency and surface and mechanical properties of three-dimensionally printed resins. J Prosthet Dent. 2024 Oct;132(4):838.e1-9. https://doi.org/10.1016/j.prosdent.2024.02.026. PMid:38582709.

7 Almuraikhi T. Assessment of tensile bond strength of a soft liner to the denture base resin with different surface treatments: an in vitro study. J Contemp Dent Pract. 2022 Jun;23(6):613-7. https://doi.org/10.5005/jp-journals-10024-3351. PMid:36259300.

8 Peracini A, Davi LR, de Queiroz Ribeiro N, de Souza RF, Lovato da Silva CH, de Freitas Oliveira Paranhos H. Effect of denture cleansers on physical properties of heat-polymerized acrylic resin. J Prosthodont Res. 2010 Apr;54(2):78-83. https://doi.org/10.1016/j.jpor.2009.11.004. PMid:20083448.

9 Koenig A, Rotenburg L, Fuchs F, Sander S, Lethaus B, Hahnel S. Influence of aging of PEEK attachment inserts on the pull‐off force of implant‐retained overdentures–a laboratory study. Clin Oral Implants Res. 2023;34(12):1363-72. https://doi.org/10.1111/clr.14180. PMid:37694944.

10 Fotovat F, Abbasi S, Nikanjam S, Alafchi B, Baghiat M. Effects of various disinfectants on surface roughness and color stability of thermoset and 3D-printed acrylic resin. Eur J Transl Myol. 2024 Jan;34(1):11701. https://doi.org/10.4081/ejtm.2024.11701. PMid:38247390.

11 Giti R, Vojdani M, Abduo J, Bagheri R. The comparison of sorption and solubility behavior of four different resin luting cements in different storage media. J Dent (Shiraz). 2016 Jun;17(2):91-7. PMid:27284553.

12 Geukens S, Goossens A. Occupational contact allergy to (meth)acrylates. Contact Dermatitis. 2001 Mar;44(3):153-9. https://doi.org/10.1034/j.1600-0536.2001.044003153.x. PMid:11217987.

13 Tugut F, Coskun ME, Dogan DO, Kirmali O, Akin H. Tensile bond strength between soft liners and two chemically different denture base materials: effect of thermocycling. J Prosthodont. 2016 Jun;25(4):319-23. https://doi.org/10.1111/jopr.12296. PMid:26375732.

14 Habibzadeh S, Omidvaran A, Eskandarion S, Shamshiri AR. Effect of incorporation of silver nanoparticles on the tensile bond strength of a long term soft denture liner. Eur J Dent. 2020 Mar;14(2):268-73. https://doi.org/10.1055/s-0040-1709923. PMid:32438430.

15 Badaró MM, Bueno FL, Arnez RM, Oliveira VC, Macedo AP, de Souza RF, et al. The effects of three disinfection protocols on Candida spp., denture stomatitis, and biofilm: a parallel group randomized controlled trial. J Prosthet Dent. 2020 Dec;124(6):690-8. https://doi.org/10.1016/j.prosdent.2019.09.024. PMid:31955835.

16 Valentini-Mioso F, Maske TT, Cenci MS, Boscato N, Pereira-Cenci T. Chemical hygiene protocols for complete dentures: a crossover randomized clinical trial. J Prosthet Dent. 2019 Jan;121(1):83-9. https://doi.org/10.1016/j.prosdent.2017.12.022. PMid:30017164.

17 Abuhaimed TS, Abou Neel EA. Sodium hypochlorite irrigation and its effect on bond strength to dentin. BioMed Res Int. 2017;2017:1930360. https://doi.org/10.1155/2017/1930360. PMid:28904947.

18 Tanweer N, Qazi FU, Das G, Bilgrami A, Basha S, Ahmed N, et al. Effect of erosive agents on surface characteristics of nano-fluorapatite ceramic: an in-vitro study. Molecules. 2022 Jul;27(15):4691. https://doi.org/10.3390/molecules27154691. PMid:35897867.

19 Kukiattrakoon B, Hengtrakool C, Kedjarune-Leggat U. Elemental release and surface changes of fluorapatite–leucite porcelain upon immersion in acidic agents. J Dent Sci. 2010 Dec;5(4):189-200. https://doi.org/10.1016/j.jds.2010.11.003.

20 Rashid H. The effect of surface roughness on ceramics used in dentistry: a review of literature. Eur J Dent. 2014 Oct;8(4):571-9. https://doi.org/10.4103/1305-7456.143646. PMid:25512743.

21 Porwal A, Khandelwal M, Punia V, Sharma V. Effect of denture cleansers on color stability, surface roughness, and hardness of different denture base resins. J Indian Prosthodont Soc. 2017 Jan-Mar;17(1):61-7. https://doi.org/10.4103/0972-4052.197940. PMid:28216847.

22 Gad MM, Abualsaud R, Fouda SM, Rahoma A, Al-Thobity AM, Khan SQ, et al. Color stability and surface properties of PMMA/ZrO2 nanocomposite denture base material after using denture cleanser. Int J Biomater. 2021 Apr;2021:6668577. https://doi.org/10.1155/2021/6668577. PMid:33927766.

23 Miettinen VM, Vallittu PK, Docent DT. Water sorption and solubility of glass fiber-reinforced denture polymethyl methacrylate resin. J Prosthet Dent. 1997 May;77(5):531-4. https://doi.org/10.1016/S0022-3913(97)70147-1. PMid:9151274.

24 Saini R, Kotian R, Madhyastha P, Srikant N. Comparative study of sorption and solubility of heat-cure and self-cure acrylic resins in different solutions. Indian J Dent Res. 2016 May-Jun;27(3):288-94. https://doi.org/10.4103/0970-9290.186234. PMid:27411658.

25 Hahnel S, Rosentritt M, Bürgers R, Handel G, Lang R. Candida albicans biofilm formation on soft denture liners and efficacy of cleaning protocols. Gerodontology. 2012 Jun;29(2):e383-91. https://doi.org/10.1111/j.1741-2358.2011.00485.x. PMid:21585518.

26 Nguyen CT, Masri R, Driscoll CF, Romberg E. The effect of denture cleansing solutions on the retention of pink Locator attachments: an in vitro study. J Prosthodont. 2010 Apr;19(3):226-30. https://doi.org/10.1111/j.1532-849X.2009.00550.x. PMid:20040032.

27 Kürkcüoğlu I, Özkir SE, Köroğlu A, Sahin O, Yilmaz B. Effect of denture cleansing solutions on different retentive attachments. J Prosthet Dent. 2016 May;115(5):606-10. https://doi.org/10.1016/j.prosdent.2015.11.012. PMid:26775247.

28 Kožíšek F. Health significance of drinking water calcium and magnesium. National Institute of Public Health. 2003;29:9285-6.

29 Ayyıldız S, Şahin C, Emir F, Ersu B. Effect of denture cleansing solutions on the retention of locator attachments over time. J Prosthodont. 2020 Mar;29(3):237-42. https://doi.org/10.1111/jopr.13144. PMid:31943512.

30 Mahboub F, Salehsaber F, Parnia F, Gharekhani V, Kananizadeh Y, Taghizadeh M. Effect of denture cleansing agents on tensile and shear bond strengths of soft liners to acrylic denture base. J Dent Res Dent Clin Dent Prospects. 2017;11(3):183-8. https://doi.org/10.15171/joddd.2017.033. PMid:29184635.
 

Submetido em:
20/12/2025

Aceito em:
17/04/2026

6a4bae35a953952a733fe232 rou Articles
Links & Downloads
1807-2577 (Eletrônico)
Rev. odontol. UNESP ©2026 Todos os direitos reservados sobre o conteúdo deste website. Os artigos seguem suas próprias licenças.

Rev. odontol. UNESP

Share this page
Page Sections